Service

Chimney Cap Installation — Boston, MA

CSIA Certified · Sized on-site to your flue · Stainless & copper · Photos before and after

A proper chimney cap keeps water, animals, leaves, and embers out of the flue. Chimney Goat installs stainless steel and copper caps across Boston and surrounding towns — sized to your specific flue, mounted securely, and finished cleanly.

  • ★ 5.0 on Google
  • 150+ five-star reviews
  • CSIA Certified
  • Licensed & Insured
Quick answer

A missing or rusted chimney cap lets in rain, animals, and debris. Chimney Goat sizes and installs a stainless or copper cap to your flue, sealed against weather and wildlife.

What chimney cap installation helps with

  • Rain and snowmelt kept out of the flue at the one spot water pours straight in
  • Animals — squirrels, birds, raccoons — locked out of a warm, open chimney
  • Leaves, twigs, and wind-blown debris stopped before they clog the flue
  • A stainless mesh spark-arrestor that keeps live embers off the roof
  • Caps sized and mounted on site so wind, not weather, can't work them loose
  • Multi-flue caps and full chase covers for chimneys with more than one flue

What's included

  • Flue measurement and cap sizing on site
  • Stainless steel or copper cap options
  • Mesh spark-arrestor and animal screen as standard
  • Multi-flue caps and chase covers where the chimney has more than one flue
  • Secure mounting that won't loosen in winter wind
  • Old cap removal and disposal if there's one in place already

Signs you may need chimney cap installation

  • Your chimney has no cap at all
  • The existing cap is rusted, loose, or missing mesh
  • You've found nests, birds, or squirrels in the flue
  • Water is getting into the flue from the top
  • Embers are landing on the roof when you burn

Common causes

An open or failed chimney cap is an open door at the top of the flue. With nothing over it, rain and snowmelt drop straight down onto the smoke shelf and damper, and New England's freeze-thaw cycle turns that water into cracked tile, rusted dampers, and stained ceilings. An uncapped flue is also the warmest, driest hole on the block to a squirrel, bird, or raccoon, and the nests they build become obstructions that back smoke into the room. Leaves and twigs collect the same way. And with no mesh spark-arrestor, a live ember can ride the draft up and land on a dry shingle roof. A stainless or copper cap closes all four problems at once — which is why it's the cheapest piece of protection on the whole chimney.

Why fixing this early matters

The cap is the cheapest insurance policy on the chimney. Without one, water pours straight down the flue, animals nest inside, and embers can land on a dry shingle roof. A proper stainless cap pays for itself the first season it stops a leak.

How Chimney Goat approaches the job

  1. 1

    Look at the flue & crown

    We get on the roof and check the flue opening, the crown around it, and any existing cap — so the new cap fits the chimney you actually have, not a guess from the ground.

  2. 2

    Measure the flue

    We measure the flue tile (or the full top on a multi-flue or oversized chimney) to the right dimensions, because a cap that's even slightly off won't seal or mount correctly.

  3. 3

    Size & select the cap

    We match the measurement to a stainless or copper cap — single-flue, multi-flue, or a full chase cover — and confirm the mesh and clearance are right for your flue's draft.

  4. 4

    Remove the old cap

    If there's a rusted, loose, or undersized cap already up there, we take it off and haul it away so the mounting surface is clean.

  5. 5

    Mount it securely

    We fasten the cap to the flue tile or crown so it stays put through winter wind — a cap that rattles loose is a cap that lets water and animals back in.

  6. 6

    Confirm the spark-arrestor & seal

    We check that the stainless mesh spark-arrestor and animal screen are seated all the way around and that nothing leaves a gap for embers, water, or wildlife.

  7. 7

    Photo walkthrough

    We photograph the finished cap from the roof so you can see exactly what went on and how it sits — the part of the chimney you can't see from the ground.

Materials & components

A cap is only as good as its metal and its mounting. Stainless steel is the workhorse — weather-tight, rust-resistant, and built to last; copper is the upgrade in looks and longevity, usually chosen where the chimney shows from the street. Every cap we install carries a stainless mesh spark-arrestor that does double duty as an animal screen, keeping embers in and squirrels, birds, and leaves out. Chimneys with more than one flue get a multi-flue cap or a full chase cover — a single metal lid over the whole top that sheds water off the crown instead of letting it pool. And it all comes down to mounting: we fasten to the tile or crown so the cap holds through Boston winter wind, not just until the next storm.

What affects the cost

We don't post flat prices because no two chimneys are the same — but here's what moves the number, so there are no surprises:

  • Single-flue vs. multi-flue. One open fireplace flue is a quick single cap. A chimney with two or three flues — fireplace, furnace, water heater — needs a multi-flue cap or a full chase cover, which is more metal and more fabrication.
  • Stainless vs. copper. Stainless is the durable, value option. Copper costs more for the material and the look, and is usually chosen where the chimney is visible from the street.
  • Flue size & shape. Standard square or round flues take a stock-sized cap. Oversized, oval, or unusual openings need a custom-sized or fabricated cap to seal properly.
  • Chimney height & roof access. A tall chimney or a steep, slate, or multi-story roof needs more setup and time to reach safely than a single-story ranch.
  • Chase cover vs. simple cap. A full chase cover that lids the whole top sheds far more water than a single cap, but it's a larger fabricated piece than a one-flue cap.
  • Whether an old cap comes off first. Removing and disposing of a rusted or seized existing cap adds a little labor before the new one goes on.
  • Crown condition underneath. If the crown the cap mounts to is cracked or crumbling, we'll flag crown repair — a cap can't seal a chimney whose crown is letting water in below it.

The honest first step is almost always an inspection or a couple of photos. Call (617) 752-8425 and we'll tell you what yours needs.

Ready to book chimney cap installation?

Free written estimate · CSIA Certified · Photos on every job · Serving Boston & nearby MA towns. No Saturday appointments. Talk to the crew that does the work.

Certified Chimney Sweep by the Chimney Safety Institute of America

Chimney Cap Installation by a Certified Chimney Sweep

Chimney Goat holds the Certified Chimney Sweep credential from the Chimney Safety Institute of America (CSIA) — the national standard for chimney inspection, cleaning, and safety.

Chimney Cap Installation project photos

A look at recent chimney cap installation work around Boston. See the full Chimney Cap Installation Gallery.

Before & after: Chimney cap installation — Chimney Goat project, Greater Boston, MA Before & after: Chimney cap installation cap crown — Chimney Goat project, Greater Boston, MA Chimney cap installation custom copper cap — Chimney Goat project, Greater Boston, MA Chimney cap installation copper cap flashing jobsite — Chimney Goat project, Greater Boston, MA

Chimney Cap Installation Service Areas

These are Chimney Goat's priority chimney cap installation areas across Greater Boston — communities where we do this work most often and can usually schedule fastest. Each link opens a local page with detail on chimney cap installation for that town or neighborhood:

See all service areas →

Frequently asked questions

What's the difference between stainless and copper?+

Stainless is the workhorse: durable, weather-tight, and reasonably priced. Copper is a step up in looks and longevity — typically chosen on homes where the chimney is visible from the street.

Do you make custom caps for unusual flues?+

Yes — we'll size and fabricate to fit. Multi-flue, oversized, or oval flues are all handled.

Do caps reduce draft?+

A properly sized cap with the right mesh does not meaningfully reduce draft. An undersized or clogged cap can — which is why sizing matters.

How long does a cap install take?+

Most single-flue cap installs are under an hour on site, including disposal of the old cap.

Do you also do chase covers?+

Yes — see chimney repair and ask about chase covers when you call.

Does every flue need its own cap, or can one cover the whole chimney?+

Both approaches work. A chimney with a single flue gets one cap sized to that flue. A chimney with two or three flues can take individual caps or a single chase cover — a full metal lid over the entire top with openings for each flue. On a multi-flue chimney a chase cover is often the cleaner, better-draining solution because it sheds water off the whole crown instead of leaving the masonry between flues exposed. We measure on site and tell you which fits your chimney.

What exactly is a chase cover, and when do I need one?+

A chase cover is a single sheet-metal top that covers the entire opening of a chimney — most common on framed or prefab chimneys with a wide chase rather than a narrow masonry flue. Instead of one small cap, it lids the whole top and slopes water off so nothing pools or runs down inside. You need one when the chimney top is too wide for a standard flue cap, when an old galvanized cover has rusted through, or when you want the most complete water protection. We fabricate them in stainless to fit your chimney's exact footprint.

How long does a chimney cap last, and when should it be replaced instead of repaired?+

A quality stainless or copper cap that's mounted correctly can last many years — copper longer than stainless, and both far longer than the bare galvanized caps that rust out fast. Replace the cap when the body itself is rusted through, crushed, or so corroded the mesh is failing. If the cap is structurally sound but has just worked loose, lost a screen, or sprung a seal, that's usually chimney cap repair, not a replacement — and we'll tell you honestly which one your cap needs rather than selling a new cap you don't need.

Google Reviews

What Homeowners Say About Chimney Cap Installation

Real 5-star Google reviews from Chimney Goat customers — including chimney cap installation and related chimney work across Greater Boston.

Jose Fajardoa year ago

Kevin did an outstanding job rebuilding and capping our chimney! Highly recommended them to anyone needing chimney repairs or maintenance!

Daniel Benjamina month ago

Chimney Goat did an excellent job rebuilding my chimney. You can see in the photo how clean the new brickwork and mortar lines look, and the fresh crown and flashing should stop the leaks for good. The crew was professional, worked safely on the roof, and cleaned up everything afterward. Fair pricing and solid masonry work — I'd recommend them if you need real chimney repair, not just a quick patch.

Kevina year ago

Michael was great! Super nice guy, showed up right on time and got straight to work. He cleaned my chimney, fixed the crown, and made sure everything was in top shape. He explained everything along the way and even gave me some tips for future maintenance. Quick, clean, and reliable – highly recommend!

Why Boston homeowners call Chimney Goat

CSIA Certified, local crew

Based in Roslindale. The same small crew that quotes the job does the work — no subcontractor roulette.

Free written estimates

You get the scope and the price in writing before any work starts. No verbal-only handshakes, no surprise add-ons.

Photos of every finding

We document what we find — including the parts of the chimney you can't see from the ground — in plain English.

Honest, right-sized fixes

The lightest fix that actually solves the problem. If a repair will do, we won't sell you a rebuild — and we clean up after.

Certified Chimney Sweep by the Chimney Safety Institute of AmericaCSIA Certified Chimney SweepChimney Safety Institute of America

★ 5.0 on Google · Licensed & insured · Free written quote, no obligation — fast response from a local crew.

Prefer to reach us directly? Email info@chimney-goat.com or call (617) 752-8425.

By submitting you agree we may contact you about your request. We never share your details.

Call Estimate Text